Replacement sensors for gas and rust detectors
of carbon the series BETA 752,754,756.
They can be installed easily and quickly.
Sensor life: 5 years
Sensor type: Methane and LPG
Packaging: blister
Solenoid valves
Normally open when the coil is not energized by the action of a spring the plunger is held in such a position that it is always open and when the coil is energized the action is downward pushing the spring causing it to close the orifice and prevent fluid flow .
According to the type of valve, the installation diagram of the kit changes, the diameter of the valve will depend on the diameter of the pipe where it is going to be installed. And the kit will depend on the client’s needs according to the distribution of the apartment’s distribution spaces.
Domestic Detectors
This system is very versatile since you can place two additional sensors to install in different places using the 654 O/G monitor with two additional 656 C or 652 O/G. In these cases and according to the application, they can be installed with solenoid valves ranging from 3/4” to 2” in diameter and different power supplies such as 230 VAC, 110 VAC and 12 VDC.
THE APPLIANCE MUST BE INSTALLED
The beta 752 / M series detector for methane gas at a maximum distance of 30 cm from the ceiling; the beta 752 / G detector series for LPG at a maximum height of 30 cm from the ground. -At a distance between 1 meter and 4 meters by the gas device (stove, boiler, etc.).